1/2 Yard Emery Cloth

Emery Cloth is the recommended paper for sanding out nicks in the bobbin, hook and throat plate area.  This sandpaper comes in strips and if you are sanding a hole see emery cord listing.

Emery Cord is made to sand out scratches in a throat plate hole or down a channel where metal needs to be smoothed for the thread to pass by without snags. 1/2 yard.

This one inch collar is generally used in the rollers on quilting machines to hold the pole from slipping from left to right.

This style handle grips are generally used on a Gammill machine. Replacement soft black sponge rubber.

T-Bracket Pin, to be used with T-bracket for use with a laser light.

Spoon Pin Discs.  These white plastic discs are used to hold a smaller size spool onto the spool pin.

Take-Up Spring (Check Spring)

Take-Up Spring or Check Spring. This is a universal check spring made for replacement in most tension assemblies.  Sometimes called a take-up spring.

These large O-Rings or rubber gromets are 1 or 2 inches and thicker than normal plumbing washers.  Used mostly on bobbin winders

These small O-Rings or rubber gromets are 1 or 2 inches and thicker than normal plumbing washers.  Used mostly on bobbin winders

You can use this with the T-bracket pin.  The T-bracket is screwed to the lower, stylist area of a quilting machine.  A laser light and other sorts of machine options can be attached to the T-pin.